As an essential material for the exchange of cold water and external water source, the plate heat exchanger plays an important role in the refrigeration system, and the East Star cold water plant in Shenzhen has a long history.
 Plate heat exchanger:
     1, BR type plate heat exchanger has high heat exchange efficiency, material flow resistance loss, compact structure, temperature sensitive control, flexible operation, convenient installation, operation, long life, high efficiency and energy saving in China is currently the most advanced heat transfer equipment.
     2, heat exchanger products, can handle the material is very wide, from the ordinary industrial water, to the high viscosity of liquid, liquid medicine, food hygiene requirements from the material is relatively high to have certain corrosive acid liquid from liquid material containing granular powder to contain suspended liquid could be used a small amount of fiber heat exchanger processing. Can be used for heating, cooling, evaporation, condensation, sterilization, heat recovery and other occasions. Such as cooling generator and rectifier internal circulation; for metallurgical and mining machinery lubricating oil; sterilization and disinfection of hydraulic station, egg, edible oil, beer sterilization, Wine; used for waste heat recovery in textile industry, papermaking industry;
     3, collect condensate, central heating;
     4, change the water heating steam boiler deaerator system; the middle heat etc.. Has been widely used in metallurgy, mining, petroleum, chemical, electric power, medicine, food, chemical fiber, textile, paper, shipbuilding and central heating and other industrial sectors.
     Two, the principle of the structure can be disassembled
     The plate heat exchanger is composed of many stamping corrugated plates at certain intervals, all around through the gasket seal, and pressing frame and overlapping spiral pressed plate and a gasket, the angle of the four hole forming fluid distributing and collecting pipe, and reasonably cold and hot fluid separately, the flow in the channel on both sides respectively. Each plate, through the heat exchange plate.
     Three, plate heat exchanger design features
     1, high efficiency and energy saving: the heat transfer coefficient in the 3000 ~ 4500kcal/m2 * C * h, higher than the shell and tube heat exchanger heat efficiency 3~5 times.
     2, compact structure: plate heat exchanger arranged closely, compared with other types of heat exchanger, heat exchanger area and occupies less space, only the shell and tube heat exchanger 1/5 for heat exchanger heat transfer area of the same.
     3, easy to clean and easy to install: plate heat exchanger will be clamped by clamping the clamping plate plate, so easy to install and disassemble, can be opened at any time to clean, at the same time due to the smooth surface, high degree of turbulence, not easy scaling. Power valve
     4, long service life: plate heat exchanger made of stainless steel or titanium alloy plate pressing, resistant to various corrosive media, the rubber pad can be replaced freely, and can be convenient in disassembly, maintenance.
     5, strong adaptability: plate heat exchanger plate as an independent component, can be arbitrarily increased or decreased according to the requirements of the process, a variety of forms can be applied to a variety of different, process requirements.
     6, do not string liquid, plate heat exchanger sealing groove set liquid leakage liquid channel, all kinds of media will not collude, even if there is leakage, the media is always out of the drain.
     For more information please contact us: Mr. Wang 13923464030 Tel: 0755-81715045 or visit our website: http://www.szdxj.com