The disadvantage of the cold water machine"
2017-04-26 08:28:04http://www.szdxj.com admin
The general use of pool cooling, the following drawbacks:
1, the water quality is poor, it is easy to block the water machine, causing greater losses.
2, waste of water resources, improve user costs.
3, when the weather is too hot, the water temperature can not meet the requirements of the quality and efficiency of the product.
If the industrial chiller temperature difference of 5 degrees (20 degrees down to 15 degrees), if a FC10 of industrial water chillers per hour standard industrial chiller flow of 3.5 cubic meters. So when you try this industrial chiller not only industrial chiller flow, also need to see how much you need if you try temperature is the temperature from 58 degrees to 7 degrees, the temperature difference is large, it will reduce the water flow per hour of frozen water, from 3.5 cubic meters reduced to more than 1 cubic meters. If you need 3.5 cubic meters per hour of industrial water cooler, you should choose a larger model.
In the trial of industrial chillers, but also to see if you are direct cooling, or indirect cooling. Direct cooling is to put the water directly into the industrial water chiller, frozen water directly out of the product you need to cool, direct cooling effect is better. Indirect cooling is equivalent to put water in a pot, the pot put on a small basin, a small pot inside to cool the product, relatively indirect cooling effect to some of the poor. So, when you choose, we should take into account the.
For more information please contact us: Mr. Wang 13923464030 Tel: 0755-81715045 or visit our website: http://www.szdxj.com