Cleaning operation steps of screw chiller
2017-04-24 08:50:36http://www.szdxj.com admin
Cleaning operation steps of screw chiller
The cleaning process is as follows:
The cleaning agent is injected into the tank, then start the pump to start cleaning operation. When cleaning, according to the forward and reverse operation, until the cleaning agent does not show acid. For mild pollution, as long as the cycle of 1 hours or so. Serious pollution, need 3-4 hours.
If a long time cleaning, cleaning agent has been dirty, the filter is also clogged dirt, should replace the cleaning agent and dry filter after the operation. After the system has been cleaned, the cleaning agent is dirty and the filter is clogged and dirty. After cleaning, it is necessary to carry out nitrogen purging and drying treatment for the refrigeration pipeline, and then charge the fluorine, and the cold water unit can be adjusted to ensure the normal operation of the water chiller.
For more information please contact us: Mr. Wang 13923464030 Tel: 0755-81715045 or visit our website: http://www.szdxj.com