Industrial open chillers are popular customer favorite market models
2017-04-17 08:49:33http://www.szdxj.com admin
1, reduce the condensing temperature in order to meet the equipment safety and production requirements as far as possible to increase the evaporation temperature and exergy under lower condensing temperature. This has increased the transformation of cooling tower to ensure the exergy efficiency of cooling water.
2, adjust the reasonable operation load of the refrigerator equipment to ensure the safe operation of the equipment, the refrigerator main engine running in the 70%-80% load ratio in the operation of the 1OO% load unit cooling power consumption is smaller. The use of this way to start with the pump, cooling tower, a comprehensive consideration of the operation.
3. To prevent and reduce pipeline scaling to improve the heat exchange efficiency of the condenser and the evaporator water if the water treatment do not exergy calcium bicarbonate and magnesium bicarbonate and heat produced by calcium carbonate and magnesium carbonate deposition in pipeline. The effect of thermal conductivity decrease exergy of the condenser and the evaporator heat exergy efficiency and make the equipment run electricity increased significantly. At this time in addition to the use of water treatment technology can also use the piping exergy automatic cleaning equipment for pipeline cleaning.
4, the low speed refrigerant refrigerator inverter adjusting exergy of the compressor centrifugal refrigeration machine after centrifuges pressure exergy. The centrifuge speed is larger the higher pressure exergy. In the actual operation of exergy equipment mostly in non full load operation. Fixed speed centrifuge equipment in small load operation, resulting in energy waste exergy. The variable frequency centrifugal refrigeration machine according to the change of the load automatically adjust the rotating speed of the compressor exergy exergy saving more space.
Low temperature water chiller:
The freezer refrigeration temperature range of -30 DEG C to 35 DEG C, cooling speed, safe and reliable, can be used for gas and liquid cooling fast, widely used in chemical industry, pharmaceutical industry, biochemical reaction at low temperature, vacuum coating, low temperature impact test for metallic materials, electronic appliances, special materials and low temperature experiment, low alloy material processing, cold treatment etc. where mold, tool.
For more information please contact us: Mr. Wang 13923464030 Tel: 0755-81715045 or visit our website: http://www.szdxj.com。