When it comes to split chillers, we must think of the name implies that it is our integration of the whole machine to do, simply say that it is our air conditioner is divided into indoor and outdoor machines. Today the East Star and everybody to share, when the split type cold water machine in use, may be part of the indoor unit because of various factors caused by cold water machine, there Water Leakage dripping phenomenon, which affects the normal operation of the chiller, must identify the reasons, troubleshooting.
       Under normal circumstances, the cause of the split type chiller water leakage of the indoor unit can be analyzed from the following points:
       1, the indoor machine of split chillers installed indoors, it is to rely on the exclusion of condensate water by gravity outflow, so the condensed water drainage pipe must be discharged along the drainage direction of certain slope for water, if the slope is not enough, even higher than that of the drainage pipe of condensed water outlet disc, it will cause condensation water drainage is poor, and even overflow, the installation process must pay attention to.
      2, condensate water plate cracks, or because of the long life of the damaged. If the transport is not protected, or the installation process is not paid attention to, it will cause damage to the water disk, and therefore should be re repaired after the use of.
      3, the condensate water outlet and the drain pipe interface damage, or the interface is not in accordance with the requirements.
      4, due to the impact of water quality or the environment caused by the split type cold water pipes / drainage holes blocked, should be timely to remove the blockage.
      5, the drain pipe is broken or damaged, should be replaced in a timely manner damaged drainage pipe, if the pressure of the water pipe should be restored to normal.
      6, condensed water plate did not follow the requirements to do heat preservation, or insulation part of the damage. Because of the low temperature of the condensate, the condensation and water drop occurred in the two condensation.
      Summarize the reasons above when the indoor machine of split cold water machine appeared Water Leakage phenomenon, can find the fault position according to the above reasons, re adjust the position of the drainage pipe, drainage pipe inclined from the inside out, or repair the condensed water tray and drainage pipe interface, dredging drainage hole and drainage pipe.
      For more information please contact us: Mr. Wang 13923464030 Tel: 0755-81715045 or visit our website: http://www.szdxj.com