Cooling water cooler with cooling tower
2017-04-07 08:23:35http://www.szdxj.com admin
The core part of the cold water compressor at work, the compression of low pressure and high pressure. Because the refrigerant from low pressure to high pressure, the high pressure pipeline will heat, the temperature will rise.
Air-cooled chiller for cooling tower is not needed to produce high pressure, air-cooled chiller will go through - the main component of cooling - fin, fan and air after heat dissipation, heat emission, and the refrigerant circulation, maintain the normal work of refrigeration compressor. Maintain a certain temperature between 30~37 degrees, but according to the different temperature of the chiller cooling capacity will vary.
The chiller is equipped with cooling tower, because of the high pressure compressor when the copper tube produced by external heat circulating water cooling tower for cooling with circulating water cooling tower cooling cycle, keep the normal temperature high pressure pipe, cooling tower into the general water temperature 37 degrees, the normal work of water temperature of 32 degrees you can ensure that the compressor. When the cooling water temperature is too high, will lead to high pressure fault. The selection of cooling tower is different according to the amount of water per hour, the inlet temperature is different, but also according to the selection of the size of the chiller power.
For more information, please call 0755-81715587, Mr. Wang 13923464030, the company website http://www.szdxj.com