Industrial water cooling machine cooling is the reason? In summer, peak is also the enterprise need industrial chiller has recently foreign customers to consult, poor heat dissipation generally by the thermometer fault, dust, poor ventilation and reason, Eugene below finishing the about poor heat dissipation main reason.
Reason 1: temperature control table out of control
Radiator is too dirty, clean the radiator and improve ventilation cooling wind machine does not work, check the fan motor is short circuit burned out maintenance or replacement motor high-pressure engine, the replacement of damaged high pressure engine
2 reasons: Industrial cold water machine body dust
Accumulated dust resulted in severe cooling caused by bad fault, need to check voltage, environmental temperature is too high and need to regularly clean cold water machine dustproof net and fuselage accumulated dust
Reason 3: compressor pressure is too low
The gas pressure is low, the back gas is low, the refrigerating capacity is insufficient, and the electric energy is wasted, and the cooling of the compressor motor is poor, and the motor is easy to be damaged.
Reason 4: line fault
Line contact is bad or break, especially the interface is affected with damp and oxidation to cause bad contact, and the other unit electronic board or total interface board fault. East Star Refrigeration