We know that compression type cold water group is by refrigeration compressor, cold suspected the four major parts, the throttle valve and evaporator composition, four parts are connected to form a closed system through a pipeline, and the compressor is as the heart of the chiller, plays a pivotal role, then how to improve the displacement compressors (gas) to improve the output coefficient? Below is water cooled chiller manufacturers for everyone
The author summed up some:
The general method is as follows
The sensitivity of 1, and the generation of suction exhaust valve;
2, gas cutting and packing box tightness;
3, the piston ring must be kept tight;
4, to maintain the output pipeline, gas cutting, gas storage tank and the cooling of the cooler;
5, the correct choice of the size of the volume of space;
6, should be relatively dry and cold inhaled gas;
7, improve air compressor speed; when necessary, cleaning the cylinder and other parts
Cold water machine imported high-quality new compressor, inlet filter, expansion valve, high and low voltage meter, temperature controller and other main parts, compressor overload protection: when the chiller load is too large, and
The water temperature is too high, the machine stops running, so as to avoid the damage of the compressor.